CM-2800
Features：
The power use the most advanced design, increase the output efficiency.
Special design of the circuit to match large radiator and cooling machine, insure the temperature of the power amplifier is lowest in any condition.
The power is supplied independently to each channel to increase signal separation.
Perfect protected control, insure the sound system safer and more reliable.
Indicator light under working condition，display the working of each channel clearly
Calorie balanced input, output, professional output socket(speakon)
|
8ΩBridge Output Power |
1100WX2 |
|
4ΩBridge Output Power |
1650WX2 |
|
2ΩBridge Output Power |
2200W |
|
8ΩBridge Output Power |
3300W |
|
4ΩBridge Output Power |
4400W |
|
Frequency Response |
20Hz-20KHz,+0,-1dB at 1watt |
|
THD+N(20Hz-20KHz) |
<0.1%,20Hz-20KHz |
|
Slew Rate |
＞27V/μs |
|
Damping Factor |
>800 |
|
Voltage Gain(8Ωrated power@ 0.775V) |
38dB |
|
Output Circuitry |
Class H |
|
Signal to Noise Ratio |
100dB |
|
Cross Talk |
>80dB |
|
Input Sensitivity(8Ω) |
1.1Vrms |
|
Input Impedance |
20KΩ balance/10KΩunbalance |
|
Cooling |
|
|
Connectors |
Input: XLR; Output:Speakon, |
|
Controls |
Front: AC switch,Ch1 and Ch2 gain knobs;Rear:Sensitivity switch,GND switch, Stereo/Parallel/Bridge switch, 30Hz Low cut 150Hz Low pass switch |
|
Indicators |
Front: STANDBY-orange LED,POWER-Blue LED,SIGNAL-Green LED ,CLIP-Red LED ,PROT-Red LED; |
|
Amplifier Protection |
short circuit,thermal,over load,clip limiter,DC voltage,soft start,ultrasonic and RF protection |
|
Gross Weight/Net Weight |
36kg/38.8kg |
|
Packing Dimensions |
60X56.5X20.2cm |
|
Power Requirements |
100V,120V,220V,240V,50-60Hz |